Senior Instrumentation & Control Inspector

Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries.

Purpose

Perform all activities necessary for Instrumentation & Control Inspection.

Functions

* Discipline Inspectors Instrumentation Inspection shall include (but not be limited to):

Control Center including

* Storage of received equipment

* Installation of panel board, console, rack, etc.

* Control center wiring

* Testing (continuity, insulation resistance, etc.).

Instrument Pressure Lines including

* Visual inspection of tag numbers, dip high and low pressure, slope, support, material & rating, purging requirements,

* Pressure & leak tests. Wiring including

* Cable identification & tag no.

* Installation

* Cable gland and sealing

* Line-line and line-ground resistance

* Testing (continuity, insulation resistance, etc.)

Signal lines including

* Inspection of materials

* Installation of tubing, fitting, valves)

* Witness air blow

* Leak tests

* Continuity tests.

Loop Tests including

* Input/output signal loops.

* Calibration of instruments including all digital and analog instruments, control valves either pre-installed or instruments installed at site.

* Installation of instruments including (18) verification of correct instruments, stands, etc.

* Review Disciplines' Quality Control Documentation for Completeness

Safety

Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment.

Other

Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems.

Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company.

Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment.

Supervisory Responsibilities

* This position has NO direct supervisory responsibilities.

Reporting Relationship

* Reports to Project Manager (PM) as line manager. Project Coordinator will support PM on issuing instructions or communications to employee.

* Daily contact and technical reporting to site client contact or client Quality Team representatives.

* Employee shall report the results of all vendor and construction site inspections on a weekly basis or more frequently as advised by client for a specific task. Inspection reports shall clearly show the items / activities inspected, inspection status, acceptance criteria, and follow-up action as necessary. Inspection reports shall be in a paper or electronic format as agreed to by client.

Computer Skills

To perform this job successfully, an individual should have complete knowledge of Microsoft Office.

Knowledge, Skills, Abilities, and Other Characteristics

* Ensures that important information from management is shared with employees and others as appropriate

* Gives and receives constructive feedback.

* Ensures that others involved in a project or effort are kept informed about developments and plans

* Ensures that regular consistent communication takes place within area of responsibility

Qualifications

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/ or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

ESSENTIAL

• Degree or Trade Certification
• Code knowledge: API-550, API-14C.

DESIRED

• 15 years' experience in Instrumentation & Control inspection in the oil and gas industry.

Education and/or Experience

Minimum of 10 years' experience in Instrumentation and Control Inspection in Oil and Gas Industry.

Working Conditions

This position is considered ONSHORE FIELD WORK which is characterized as follows:

* Outdoors working on work site, day or night. Indoor office for reporting.

* Work sites can be warehouse, yard, vendor shop, construction site, industrial city

* Requires working on or near oil and gas plant equipment, pumps, skids, modules

* During summer season humidity is above 90%. Noise can be over 85 decibels and the light is intense/glare.

* Potential exposure to open fire/flames/sparks/gases on adjacent work parties

* Potential exposure to airborne dust, fumes at work site

* Work surface is stable, height is elevated. Use of ladders and scaffold for some access.

* Confined space required but infrequent

* Working outside for extended periods of time in temperatures as high as 49C.

Physical Activity/Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

This position is considered MEDIUM work.

Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.